Troubleshooting – KANOMAX 6036 Multi-function thermal anemometer Software Manual User Manual
Page 22
5. Troubleshooting
18
6. Troubleshooting
¾ Communication error message is displayed.
Refer to “Setting the Measurement Unit and Baud Rate” in the User’s Manual of ANEMOMASTER MODEL
6035/6036(P.21) and set the Baud rate of the instrument to 19200bps.
Confirm the communication settings.
Make sure that the computer is connected to the Anemomaster with a communication cable.
After making proper connection, close the software and reboot it.
If you require additional technical support, please contact your local distributor or our service center.