Alamo GR60 - Manual (Page 128)

MAINTENANCE
GR60/72 02/07 Maintenance Section 5-4
© 2007 Alamo Group Inc.
MAINTENANCE
Driveline Lubrication
Grease Fittings are located on the Cross Assembly of each U-Joint and on the Round Housing. Grease the U-
Joint after each 8 hours of use. Do not force grease through the Needle Cup Assemblies. Grease the Round
Housing after every 8 hours of use, except in sandy soil conditions. Some PTO-to-Hitch connections may
necessitate cutting a hole in the shields to be able to align the Grease Fitting holes for lubrication.
(Mnt-0015 and Mnt-0016).