Switching connected devices – GEAR4 HouseParty Portable User Manual
Page 4
![background image](/manuals/367259/4/background.png)
3
GEAR4 / HouseParty Portable / User Manual
To pair your iPod touch, iPhone
or iPad with the speaker:
■
With your iPod touch / iPhone / iPad in your
hand, go to Settings > General > Bluetooth
on your device.
■
Turn Bluetooth ON.
■
Press and hold the Bluetooth button on the
speaker ( ) until the Bluetooth icon flashes
quickly and an audio tone is played (about 6
seconds). This indicates the speaker has
entered pairing mode.
■
“HouseParty Portable” will appear under
devices within the Bluetooth menu. Select
this to pair.
■
Your iPod touch / iPhone / iPad will then pair
with the speaker after several seconds.
■
To pair any additional devices, please follow
the above process again.
Connecting your paired
iPod touch / iPhone / iPad
to the speaker:
■
When the speaker is switched on, it will
automatically connect to the last paired or
docked device.
■
If connection to that device is not made, you
can manually connect another paired device.
■
On your iPod touch / iPhone / iPad, go to
Settings > General > Bluetooth.
■
Tap on ‘HouseParty Portable’. The
Bluetooth connection between the speaker
and chosen device will now be made.
Note: Only one device can be connected to the
speaker at any given time.
Switching connected devices:
■
To switch the connection with another paired
device, dock your chosen device onto the
speaker, leave for 5 seconds and undock.
Your chosen device will now be automatically
connected to the speaker.
■
To switch the connection manually, short
press the Bluetooth button ( ) on the speaker.
This will drop the connection to any
connected device.
■
On your iPod touch / iPhone / iPad, go to
Settings > General > Bluetooth.
■
Tap on ‘HouseParty Portable’. The
Bluetooth connection between the speaker
and chosen device will now be made.
■
If no connection is made within 30 seconds of
the Bluetooth button ( ) being pressed, the
speaker will automatically connect to the last
paired or docked device.
Note: Connections between speaker and
devices are only possible if devices have
previously been paired.
PG532_HouseParty_Portable_Manual_V1.5.indd 3
19/06/2012 17:05