Atlantis Land I-Storm USB ADSL Modem A01-AU1 User Manual

Page 52

I-Storm USB ADSL modem

If this test return FAIL consistently and your DSL modem seems
not working, check to make sure the VPI and VCI are configured
correctly.
This test returns SKIPPED if the DSL synchronization test
failed.

Test Ethernet connect to ATM

This test returns PASS if the ATM AAL5 module is loaded
correctly in your DSL modem. If this test returns FAIL, an internal
error has occurred.
This test returns SKIPPED if the DSL synchronization does not
return PASS.

Test PPPoE connection

This test returns PASS if your login name and password have
passed authentication with your service provider.
If this test returns FAIL, run this test again a few minutes after this
test is completed, especially if your PPP connection has just been
improperly disconnected. If this test consistently fails, first make
sure your login name and password are correct. Remember that
login name and password are case sensitive.
This test returns SKIPPED if “PPPPOE connect to Ethernet” test
does not return PASS and your DSL modem is configured as
PPPOE encapsulation.
This test also returns SKIPPED if “Ethernet connect to AAL5”
test does not return PASS and your DSL modem is configured
as PPPOA encapsulation.

Test PPP Layer connection

This test returns PASS if your DSL modem has been assigned a
valid IP address by your service provider through DHCP or your
DSL modem is assigned a valid IP address statically.