Airlink101 AGSW808POE - Manual (Page 7)

6
• Humidity: 5% ~ 90% RH, non-condensing
The site where you place the switch may greatly affect its performance.
When installing, take the following into your consideration.
2.1 Installation
The setup of the switch can be performed using the following steps:
• Visually inspect the DC jack and make sure that is fully secured
to the power adapter
• Make sure that there is proper heat dissipation and adequate
ventilation around the Switch. Do not place heavy objects on the
Switch.
2.2 Desktop or Shelf Installation
When installing the Switch on the desktop or shelf, please attach the
rubber feet to the Switch. Peel off the protective paper on the pads and
attach them on the bottom of the Switch (one at each corner).
2. Installing the Switch