Doric Instruments 450 Series Digital Handheld Thermometers - Manual (Page 2)

VAS Engineering
Model 450K Temperature Instruments, Probes, and Accessories
Model Description Temp. Rating Application Indicating Time*
TP254 K-type Immersion Probe. An immersion probe with iconel sheath and wooden handle. 2012°F Liquids
(1100°C)
TP255 K-type Thermocouple Wire. A 4-foot long thermocouple wire with industry standard 392°F Surface/Air
miniature connector plug attached. (200°C)
MH100K Master Probe Handle. Extension probe handle. High temperature rated with 4-foot armored N/A Option handle N/A
covered leadwire. For use with TP110K, TP112K, TP120K and TP130K probes.
TP110K Immersion Probe. A general purpose immersion sensor with grounded junction for fast 1200°F Liquids 10 seconds
response. Stainless steel sheath. For use with Model MH100K Probe Handle. (650°C)
TP112K Piercing Probe. Sharp, knife-edge stainless steel sensor for measuring semi-solid materials 800°F Liquids 6 seconds
such as meats, plastics, rubber. For use with Model MH100K Probe Handle. (425°C) Semi-solid
TP120K Surface Probe. Heavy duty, fast response sensor for surface measurements of hot plates, 1200°F Surface 6 seconds
furnaces, molds, etc. Stainless steel sheath. For use with Model MH100K Probe Handle. (650°C)
TP130K Air Probe. Exposed junction air sensor with radiation protection shield. Suitable for all 1200°F Air/gas 45 seconds
air/gas measurements. For use with Model MH100K Probe Handle. (650°C)
TP126K Low Mass Surface Probe. Mini-tip sensor, stainless steel sheath, ideally suited for small spot 800°F Surface 5 seconds
surfaces in electronics, laboratory biological applications, and other surface measurements where (425°C)
fast response is necessary. Includes 4-foot, 28-gauge leadwire and standard mini-connector.
TP114K Hypodermic Probe. Small diameter piercing probe with grounded knife edge tip, for laboratory 600°F Liquids 2 seconds
measurements. Includes 4-foot, 28-gauge leadwire and standard mini-connector. (315°C) Penetration
TP128K Attachable Probe. Small metal disc sensor for securing to fixed surfaces. Supplied with 6-foot, 1500°F Surface 5 seconds
24-gauge leadwire and standard mini-connector. (815°C)
Model 450PT Temperature Instruments, Probes, and Accessories
Model Description Temp. Rating Application Indicating Time*
TP110P Immersion Probe. Wide range, long reach for all immersion applications such as baths, -238° to +1112°F Liquids 20 seconds
liquids, semi-liquids. (-150°C to +600°C)
TP112P Piercing Probe. Sealed, rugged for fast response in penetrating applications such as food -58°F to +500°F Penetration liquids 20 seconds
processing, plastics, sciences. (-50° to +260°C) and semi-solids
TP120P Surface Probe. Heavy-duty, ideal for wet and dry surfaces, metallic or non-metallic. -58° to +1112°F Surface 10 seconds
(-50°C to +600°C)
TP130P Air Probe. Fast response air and gas measurements. Long reach for duct, oven, and ambient -58° to +500°F Air/gas 30 seconds
measurements safety. (-50° to 260°C)
Model 450TH Temperature Instruments, Probes, and Accessories
Model Description Temp. Rating Application Indicating Time*
TP401TH General Purpose. Esophageal or rectal temperature in humans and animals. Often buried 212°F Liquids 35 seconds
for subsoil readings. Used for air where fast response is not required. Most rugged (100°C)
probe. Vinyl tip and lead.
TP403TH Tubular Immersion. For rugged duty in liquid immersion. Fast response oral or rectal. 212°F Liquids 15 seconds
Stainless steel. (100°C)
TP409TH Attachable Surface Temperature. Tape on skin or flat surfaces. Good for heat loss and 212°F Surface 5 seconds
compression efficiency study of piping systems. Stainless steel cup, epoxy-backed. (100°C)
*Indicating Time 99%
Ordering Guide
Model Description Connection Type
450K K Thermocouple meter Standard sub-mini thermocouple
450J J Thermocouple meter Standard sub-mini thermocouple
450E E Thermocouple meter Standard sub-mini thermocouple
450T T Thermocouple meter Standard sub-mini thermocouple
450PT Platinum RTD meter 3-pin TA3M
450TH Thermistor meter 1/4" phone jack
Doric 450 Series
A Division of VAS Engineering, Inc.
4750 Viewridge Avenue, San Diego, CA 92123
(619) 569-1601 Fax (619) 569-8474
e-mail: [email protected]
Toll Free 1-888-423-6742
© 1999 VAS Engineering. Specifications subject to change without notice.
www.doric-vas.com
94348.Doric450.1 3/19/99 2:13 PM Page 2