DeFelsko PosiTector DPM v.2.0 User Manual

Page 10

Set Clock

All batches are date-stamped when created, and all
datasets are time-stamped (24 hour format) when
stored into these batches. It is therefore important to
keep both the date and time current using this menu
button. Alternatively, the date and time can be
updated when the instrument is connected to the
optional PosiSoft software (pg. 12).

Reset restores factory settings and returns
the instrument to a known, out-of-the-box
condition. It is handy when you want to “start all
over”. The following occurs:
- all batches are closed and stored datasets are

erased.

- menu settings are returned to the following:

Memory = OFF Alarm = ON

A more thorough Reset can be performed by holding
the (+) button when the instrument is powered
down until the Reset symbol appears. It
performs the same function as a menu Reset with
addition of Units = °C, and Language = English.

Date and Time are not affected by any Reset.

Setup Menu

Setup

Reset

NOTE:

This option causes the display to rotate 180°. Ideal
for right-side-up viewing in any position.

Flip Display

This menu button converts the display and all stored
datasets from Celsius to Fahrenheit or vice versa.

Units

Shortcut:

The (-) button flips the display.