Atlantis Land 56K V.90/V.92 - Manual (Page 6)

4. Check your modem card model.
5. Plug the telephone cable into the LINE jack located at the
front of the bracket. Plug the other end of the telephone cable
into a telephone line jack.
6. To connect a telephone to the modem:
a. Plug the telephone to the modem PHONE jack.
b. Lift the handset and listen for a dial tone to check for a
working connection.
7. Turn your computer on. If your O.S is not Windows
9X/ME/2K/NT/XP, please read the guide.doc in Application
Software CD. There is more detail installation description
inside. If your O.S is Windows 9X/ME/2K/NT/XP, please
read section 4/5/6/7/8/9.
4 Setting Up Your Modem for Windows
95/98
1. Turn on your computer. As the Windows 98 operating
system boots up, it displays a Add New Hardware Wizard
dialog box shown on your screen for a few seconds with the
identifier name (PCI Communication Device) of your
modem.
2. Click Avanti, then a new dialog box will show on the
screen.