Catskill Craftsmen 1843 - Manual (Page 4)

Hardware for 1842
1 3/4” Phillips Flat Head Bolt (8)
1 1/4” Phillips Flat Head #8 Screw (20)
1” Truss Head Machine Screw (12)
5/8” Pan Head Screw (6)
5/8” Phillips Flat Head #8 Screw (7)
3/4” Long 3/16” DIA. Steel Pin (4)
1” Long 3/16” DIA. Steel Pin (26)
1 1/2” Long 3/16” DIA. Steel Pin (8)
Hinge (3)
Caster Socket (4)
5/8 Wooden Disk (8)
Nickel Handle (6)
Towel Bar Post (2)
Wheel Casters (2) Locking Wheel Casters (2)
Magnet Plate (3)
Magnet (3)
3/16” Flat Washer (8) 10-24 Hex Nut (8)
5/8” Phillips Flat Head #8 Screw (26)
5/8” Phillips Flat Head #6 Screw (8)
5/8” Phillips Flat Head #5 Screw (4)
(Used on “L” Brackets
and to attach cabinet glides)
(Used on Drawer Glides)
1/2” Phillips Flat Head #4 Screw (3)
(Used on Magnet Plate
Included in magnet pack)
(Used on Magnet
Included in magnet pack)
2” Long 3/16” DIA. Steel Pin (8)
Bastion Set Screw (2)
Bastion Post (2)
Bastion Barrel Nut (2)
“L” Bracket (4)
Drawer Glide (1 Set )
Drawer
Cabinet
P/N Drop Leaf Support (2)
Polished Nickel Towel Bar (1)
1 1/2” Phillips Flat Head #8 Screw (2)
Add Pack for 1843
(Use brass screws
for knife rack)
(Used on “L” Brackets
and to attach the door spacer)
(Used on
Drawer Back)