American Weigh Scales X-1500 - Manual (Page 3)

I. OPERATION
Place Scale on a horizontal flat surface.
1. Press [ ] key.
2. Wait until "0.0” is displayed.
3. Put the object(s) on the weighing platform.
4. Using the [ M ] key, you can switch between
weighing units.
II. TARE WEIGHING
1. Turn on scale as described above.
2. Place the "tare item" on the platform.
3. Press [ T ] and wait until "0.0" is displayed.
4. Add the "net-weight-item".
III. CALIBRATION
Calibration is NOT required before first use. Only
calibrate if scale is not weighing properly.
**Make sure you use 1500g of weight or the calibration
will not be accurate**
1. Turn ON the scale.
2. While the display shows "1250", press and hold the
[ M ] key until the display shows "CAL".
3. The LCD will now display "1500g", indicating you
should place 1500g on the scale.
4. Place the weights (ie 3 x 500g - not included) onto
the platform.
5. The display will show "PASS". Calibration is
complete! Press [ ] to turn off the scale.
X-1500_manual.indd 3 10/23/2006 10:42:22 AM