American Weigh Scales CP-300 User Manual

Page 4

steps 1 through 3 above.

A. CP-300 Calibration Steps

1. Turn off the scale. Press and hold the “MODE” key

then press the [ ] key until the display shows a

random number. Now release both keys.

2. Press the [ ] key again. The display will show “AL

0” then “100.00”. Gently place a 100g weight on the

center of the platform. The LCD will display “AL F”

then “100.00”.

3. Calibration is complete. If the scale shows “AL E”,

an error has occurred - Turn off the scale and repeat

steps 1 through 3.

IV. CLOCK OPERATION

1. Diagram

2. Clock Mode & Timer Mode

a. Press button

B to switch between normal "Clock

Mode" and "Timer Mode".

A. Hour / 12/24 Time

B. Mode / Set / Enter

C. Minute / Start / Stop

D. Backlight