American Weigh Scales BS-250 - Manual (Page 3)

I. OPERATION
This is a TOUCH SCREEN scale, it is best to press
the keys on the LCD with 30-50g strength using
your finger or pen etc.
1. Press [I/O] key.
2. Wait until “0.0” is displayed.
3. Put the object(s) on the weighing platform.
4. Using the [M] key, you can switch between the
weighing units.
II. COUNTING FUNCTION
1. Turn on the scale and wait until the LCD displays
"0.00"
2. Place a sample amount (25pcs, 50pcs, 75pcs or
100pcs) of the quantity you wish to weigh and count
onto the platform.
3. Press and HOLD [C] key for 2 seconds, the LCD will
display "25".
4. Press [M] key to select the sample amount of the
item that you have put onto the platform.
5. Press [C] key to confirm the above information, the
LCD will now display "pcs" in the corner, to show that
the scale is in counting mode.
6. Remove the sample quantity from the platform.
7. You now can place any amount of your item(s) on
the scale and the LCD will display a count.
8. You can switch between weighing mode or counting
mode by pressing [M] or [C] key respectively.