WEN 2312 Variable Speed Multi-Tool Kit User Manual

Page 5

e. Do not overreach. Keep proper footing and balance at all times. This enables

better control of the power tool in unexpected situations.

f. Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing

and gloves away from moving parts. Loose clothes, jewelry or long hair can be
caught in moving parts.

4. Power tool use and care

a. Do not force the power tool. Use the correct power tool for your application. The

correct power tool will do the job better and safer at the rate for which it was
designed.

b. Do not use the power tool if the Power Switch does not turn it on and off. Any

power tool that cannot be controlled with the Switch is dangerous and must be
repaired.

c. Disconnect the Power Cord from the power source before making any

adjustments, changing accessories, or storing the power tool. Such preventive
safety measures reduce the risk of starting the power tool accidentally.

d. Store idle power tools out of the reach of children and do not allow persons

unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.

e. Maintain power tools. Check for misalignment or binding of moving parts,

breakage of parts and any other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired before use. Many accidents
are caused by poorly maintained power tools.

f. Keep cutting accessories sharp and clean. Properly maintained cutting accessories

with sharp cutting edges are less likely to bind and are easier to control.

g. Use the power tool and its accessories in accordance with these instructions,

taking into account the working conditions and the work to be performed. Use of
the power tool for operations different from those intended could result in a
hazardous situation.

5. Service
Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.