WEN 5182 18 Volt Cordless Drill/Drive Kit User Manual
Page 6
![background image](/manuals/366040/6/background.png)
3. Use of an attachment not recommended or sold by the battery-charger manufacturer may
result in a risk of fire, electric shock or injury to persons.
4. Do not abuse the cord or charger. Never use the cord to carry the charger. Do not pull the
charger cord to disconnect the plug from receptacle. Damage to the cord or charger could
occur and create an electric shock hazard. Replace damaged cords immediately.
5. Make sure that the cord is located so that it will not be stepped on, tripped over, come in
contact with sharp edges or moving parts, or otherwise subjected to damage or stress. This
will reduce the risk of accidental falls, which could cause injury and damage to the cord,
which could then result in electric shock.
6. Keep the cord and charger from heat to prevent damage to the housing or internal parts.
7. Do not allow gasoline, oils, petroleum-based products, etc. to come in contact with plastic
parts. These materials contain chemicals that can damage, weaken, or destroy plastic.
8. Do not operate the charger with a damaged cord or plug, which could cause shorting and
electric shock. If damaged, have the charger repaired or replaced by an authorized service
technician at Service Center.
9. Do not operate the charger if it has received a sharp blow, been dropped, or has otherwise
been damaged in any way. Take it to an authorized service technician at Authorized Service
Center for an electrical check to determine if the charger is in good working order.
10. Do not disassemble the charger. Take it to an authorized service technician at a Service
Center when service or repair is required. Incorrect reassembly may result in a risk of electric
shock or fire.
11. Unplug the charger from the electrical outlet before attempting any maintenance or cleaning
to reduce the risk of electric shock.
12. Disconnect charger from the power supply when not in use. This will reduce the risk of
electric shock or damage to the charger if metal items should fall into the opening. It will also
help prevent damage to the charger during a power surge.
13. Risk of electric shock. Do not touch the uninsulated portion of output connector or
uninsulated battery terminal.
14. Save these instructions. Refer to them frequently and use them to instruct others who may
use this tool. If you lend this tool to someone else, also lend these instructions to them to
prevent misuse of the product and possible injury.
6