WEN 4018 9 Feet Electric Pole Saw - Manual (Page 10)

10
Follow these steps to operate:
1. Loosen the locking lever. Pole will slide freely.
2. Adjust the Tube 1 &2 length that can easy reach the branch, and then tighten the locking lever securely.
3. Use both hands to grip Pole Saw. Use only designated grip areas when operating Pole Saw. Use firm grip.
Thumbs and fingers must wrap around Pole Saw handle and pole.
4. Make sure your footing is firm. Keep feet apart. Divide your weight evenly on both feet.
5. When ready to make a cut, press in trigger switch lock-out and squeeze trigger switch.
This will turn pole saw on.
opEratIon
Warning – always follow safety procedures. Use the chainsaw
only for cutting wood and not other types of materials. Do not
use the chainsaw as a lever for lifting, moving or splitting ob-
jects. never cut in high wind, bad weather, poor visibility con-
ditions, or in extreme temperatures. always check for dead
branches which may fall during cutting operations.
NEvER STAND
DIRECTLy UNDER
ThE LIMb yOU
ARE TRIMMINg.
AlWAys POsITION
yOURSELf OUT
Of ThE pATh Of
fALLINg DEbRIS.
NEvER STAND
ON A LADDER
OR OThER TypE
Of UNSTAbLE
suPPORT WhIle
USINg ThE pOLE
sAW.
DO NOT USE
POle sAW NeAR
CAble, eleC-
TRIC POWeR
OR TELEphONE
LINES. MAINTAIN A
MINIMUM CLEAR-
ANCE Of 10 fEET
fROM All POWeR
LINES.
KEEp OThER
pERSONS fROM
CUTTINg END Of
POle sAW ANd AT
A SAfE DISTANCE
fROM WORk
AREA.
POLE SAW TRIMMING PRECAUTIONS