WEN 3500 Generator Air Cleaner and Carburetor Removal - Manual (Page 2)

Remove the metal grate from the Air Cleaner housing. It is held in position by two plastic
pins. Pull he grate straight off the pins and set it aside.
Under the grate you will see a 10mm nut. Remove the nut and set it aside.
On the LEFT side of the Air Cleaner housing you will see a rubber hose. Remove the clamp
with pliers and slide it up the tube. Insert a flat screwdriver blade between the hose and the
housing and wiggle the hose away from the plastic nipple. The screwdriver will help break the
seal between the hose and the nipple.