Electric instructions – WEN 22200 20 Gallon Vertical Tank Air Compressor User Manual
Page 7
![background image](/manuals/366004/7/background.png)
15. This product is not a toy. Keep it out of reach from children.
16. People with pacemakers should consult their physician(s) before use. Electromagnetic fields
in close proximity to heart pacemaker could cause pacemaker interference or pacemaker
failure.
WARNING: The brass components of this product contain lead, a chemical known t
the State of California to cause birth defects (or other reproductive harm). (Ca
Health & Safety code 25249.5, et seq.)
o
lifornia
17. The warnings, precautions, and instructions discussed in this Operator's Manual cannot cover
all possible conditions and situations that may occur. It must be understood by the operator
that common sense and caution are factors which cannot be built into this product, but must
be supplied by the operator.
ELECTRIC INSTRUCTIONS
Grounding Instructions
1. IN THE EVENT OF A MALFUNCTION OR BREAKDOWN, grounding provides the path
of least resistance for electric current and reduces the risk of electric shock. This
tool/equipment is equipped with an electric cord that has an equipment grounding conductor
and a grounding plug. The plug MUST be plugged into a matching outlet that is properly
installed and grounded in accordance with ALL local codes and ordinances.
2. DO NOT MODIFY THE PLUG PROVIDED. If it will not fit the outlet, have the proper
outlet installed by an electrician.
3. IMPROPER CONNECTION of the equipment grounding conductor can result in electric
shock. The conductor with the green insulation (with or without yellow stripes) is the
equipment grounding
conductor.
If
repair
or
replacement
of
the
electric
cord
or
plug
is
necessary,
DO
NOT
connect
the equipment grounding conductor to a live terminal. CHECK
with a licensed electrician or service personnel if you do not completely understand the
grounding instructions, or if you are not sure if the tool/equipment is properly grounded.
4. USE ONLY THREE WIRE EXTENSION CORDS with have 3-prong plugs and 3-prong
outlets that accept
the
tool/equipment’s
plug.
Repair
or
replace
damaged
or
worn
cords
immediately.
5. CAUTION: In all cases, make certain the outlet is properly grounded. If you are not sure if it
is, have a licensed electrician check the outlet.
7