WEN 4256 Bench Grinder Manual - Manual (Page 11)

11
ASSEMBLY
Warning: To avoid injury from unexpected starting or electrical shock, do not plug the power
cord into a source of power during unpacking and assembly. This cord must remain unplugged
whenever you are adjusting/assembling the grinder.
If any part is missing or damaged, do not attempt to assemble the grinder, or plug in the power cord.
Attach the eye shield
(Fig. 1)
Attach eye shield bracket to the upper grinding wheel housing using
hardware provided.
Caution: Eye shields do provide total protection for the eyes; for
maximum safety, always wear safety goggles when using this bench
grinder.
Attach the tool rest (Fig. 2)
Tool rests help hold your workpiece close to the grinding wheel and give
the operator much more control when the workpiece comes into contact
with the wheel.
Attach the tool rests as shown to the lower portion of the wheel housing.