Video Mount Products AR-1B - Manual (Page 3)

Step 1
Before starting, lay out all parts to your mount and match them to
the parts list provided. Verify that you have all your parts before
attempting to assemble the mount.
Step 2
Attach the extension rails
(#1) to the mounting rails of the mount
by inserting the flat head screws (#2) into the countersink holes in
the front of the extension rails (#1) . Then use the nylon nuts (#3)
and washers (#4) on the backside of the mounting rails to secure
the flat head screws (#2) .
Step 3
Attach the flat panel to the extension rails
(#1) with the correct
hardware that is provided with the original mount.
Please verify that all nuts and screws are securely tightened.
Step 2: Attaching the extension
rails to the mounting rails
Step 3: Attaching the flat panel to
the extension rails
WARNING: The installer of these products must verify that the mount
surface, ceiling or wall, will safely support the combined weight of
all attached equipment and hardware. Video Mount Products will
not be held liable for the improper use or installation of its products.
Enjoy Your Mount!
1 3
2
2
1
1
4