AGFA ePhoto CL18 - Manual (Page 14)

Setup
14
An automatic duplex unit is provided with DP-CL22 as
standard. (An option for DP-CL18)
1
Push the front door release button (1) and open the
front door (2).
2
Insert the automatic duplex unit while confirming the
position (A and B).
3
Push the automatic duplex unit down (1) (and paste
the label (2) provided with DP-CL18 only so it is
overlapped on the jam clear label that has been
pasted).
NOTES:
• The label is provided with DP-CL18 for referring to
how to clear a media jam for when installing an
automatic duplex unit (option) in future. Save it
carefully for the time.
• If it is difficult to paste the Jam clear label, take the
automatic duplex unit out of the printer and paste it.
4
Close the front door.
Paste the enclosed “Supplies Re-order Label” near the
printer’s LCD panel to assist you in interpreting the
supplies related messages that may appear on the
printer’s LCD display.
Installing the Automatic Duplex Unit
1 1
2 2 2
A
B B
Pasting the Re-order Label
Jam clear label
for DP-CL18
1 1 1 1
2 2 2