Audiovox IM-500 - Manual (Page 7)

first track on each disc will be played. When a desired disc is reached, press the Scan
button
cs
again and play of the disc will continue (“DISC” and “SCAN” will disappear
from the display panel). The Disc Scan mode will also be cancelled by activating any
other disc function (Select, Cue, Review, Shuffle or Repeat).
ct
TRACK/DISC REPEAT (RPT)
When the Repeat button
ct
is pressed, the “RPT” indication will appear on the display
panel and play of the selected track will be continually repeated until the Track Repeat
mode is cancelled by pressing the Repeat button
ct
again or by activating the Scan
cs
or Shuffle
cu
functions (“RPT” will disappear from the display panel).
When the Repeat button
ct
i s pressed and held longer than 2 seconds, the “DISC”
and “RPT” indications will appear on the display panel and play of the selected disc
will be continually repeated. The Disc Repeat mode can be cancelled by pressing the
Repeat button
ct
again or by activating the Scan
cs
or Shuffle
cu
functions (“DISC”
and “RPT” will disappear from the display panel).
cu
TRACK/DISCSHUFFLE(SHF)
When the Shuffle button
cu
is pressed, the “SHF” indication will appear on the display
panel and the tracks on the disc will be played in a random, shuffled order. The Track
Select buttons
cn
and
co
will also select tracks in the shuffled order instead of the
normal progression. The Track Shuffle mode can be cancelled by pressing the
Shuffle button again or by activating the Scan
cs
or Repeat
ct
functions (“SHF” will
disappear from the display panel).
When the Shuffle button
cu
is pressed and held longer than 2 seconds, the “DISC”
and “SHF” indications will appear on the display panel and the discs in the magazine
will be played in a random, shuffled order as well as the tracks on each disc. When
all the tracks on the selected disc have been played, the next disc will be chosen in
shuffled order and its tracks will be played in shuffled order. The Disc Shuffle mode
can be cancelled by pressing the Shuffle button
cu
again or activating the Scan
cs
or Repeat
ct
functions (“DISC” and “SHF” will disappear from the display panel).
ERROR SIGNS
If a problem should develop while operating the CD changer, the following error sign
indications may appear on the display panel.
E:01 Indicates abnormal disc changer function. Consult your car stereo
specialist or service facility for further assistance.
E:02 Indicates excessive temperature conditions. The error sign will go
off and play will resume when the changer temperature returns to the
normal range.
E:07 Indicated disc may be loaded in the magazine upside-down. Re-
load disc properly if necessary. May also indicate that the disc is
dirty in which case, clean the disc and re-load it. If this does not
restore correct operation, consult your car stereo specialist or
service facility for further assistance.
- - - Magazine is not loaded in the changer.
0 0 0 No discs are loaded in the magazine.
1:- - No disc is loaded in magazine tray #1.(2: - - indication for tray #2,etc.)