Impli, Lex 2100, Modular – Tomlinson SF2100 Molded Cabinet User Manual

Page 2: Dispensing systems

O:\Cad\JME INSTRUCTION SHEETS\1915604B.dwg

1 of 2

PART 1: Disassemble

Peel off gasket from lip of dispenser (See Figure 4 illustration C and D).

Remove spring from dispenser (See Figure 4 illustration G and H).

NOTE: CAUTION when removing gasket, pusher may be under small amount of spring tension.
Remove pusher from spring (See Figure 4 illustration E and F).

Remove decorative clamp ring (See Figure 4 illustration A and B).

3.
4.

13700 Broadway Ave.

DIVISION OF TOMLINSON INDUSTRIES

DISPENSING SYSTEMS

Cleveland Ohio 44125-1992

Tomlinson Industries 1999

Fax: 216/587-0733

www.tomlinsonind.com

World Class, Worldwide

Phone: 216/587-3400

MODULAR

NSF

CLEANING THE DISPENSER:

STACKABLE CABINET CUP DISPENSERS

IMPLI

LEX 2100

-F

Your Modular SIMPLI-FLEX dispenser is designed to provide

an easy means of dispensing. Please clean dispenser before use.

Regular cleaning will prolong the life of the dispenser, keep it

looking new and ensure sanitary dispensing.

(A)

(B)

(C)

(D)

(E)

(F)

(G)

(H)

(I)

(K)

direction 3 to 4 turns. (See Figure 4 illustration I thru K)

Using a philips screwdriver loosen screws by turning in a counter-clockwise

NOTE: It is not necessary to remove screws from cabinet dispenser.

Align eyelet holes with head of screws by rotating dispenser tube in a

counter-clockwise direction. (See Figure 4 illustration L thru N)

tube parallel with cabinet. (See Figure 4 illustration O)

Remove dispenser tube from cabinet by sliding horizontally keeping dispenser

For reference to instructions below use exploded view of cabinet

dispenser. (See page 1 Figure 3)

(J)

FIGURE 4

Rinse cabinet, dispenser tube, spring, pusher and wipe with a non-toxic cleaner/sanitizer.

Clean clamp ring and gasket in hot, soapy water. Air dry.

NOTE: these parts are dishwasher safe.

Reassemble cabinet dispenser in reverse order. (See Figure 4 illustration O thru A)

PART 2: Cleaning parts

(M)

(N)

(L)

(O)

NOTE: CAUTION when reassembling, do not over tighten screws(2 inch pounds maximum).

Patent Pending

Form 1915604 Printed in the U.S.A. 9/00