Avanti OCRB43W - Manual (Page 15)

15
same time the motor fan will operate. Convection will keep a consistent temperature. The oven heats
quickly, so preheating is not necessary or desirable. The fan circulates the hot air around the food
making baked food rise quickly and evenly.
When CONVECTION is completed, turn the operation selector knob, function selector knob, temperature
control knob and timer selector knob to the /”0” position, open door fully and remove food carefully,
using the metal handling tool provided.
To Use the TOAST Function
Turn the OPERATION selector knob to the “OVEN ON” position.
Turn the FUNCTION selector knob to the TOAST position.
Turn the TIMER selector knob to your desired cooking time.
Turn the TEMPERATURE control knob to the desired temperature.
Place the oven rack in the upper position.
No preheat period is required before toasting.
Place the bread to be toasted directly on the rack in the center of the oven, close the door.
Both the top and bottom elements will operate when TOAST function is used.
When TOASTING is completed, turn the operation selector knob, function selector knob, temperature
control knob and timer selector knob to the /”0” position, open door fully and remove food carefully,
using the metal handling tool provided.
Different types of bread require different temperature. Lighter breads and waffles require a lower
temperature setting. Darker breads, muffins, and English muffins require a higher temperature setting.
? Using Your Range Top
?
Place your cooking pan on the desired burner.
?
Turn the OPERATION selector to the desired position.
?
Turn the TIMER selector knob to your desired cooking time. Then range top will operate.
?
There are three different types of dual burner combinations for your choice ( , and ).
?
After using your range top, turn the operation selector knob to the position.
Note: Do not use pans with a diameter less than that of burner. It is advisable to use pans, which have
flat bottom of good thickness. The burners should not be used without a pot or pan on them. If any liquid
spillage occurs it is recommended to wait for the burners to cool down then wipe with a cloth.