Drivelink usb3.0 – SHARKOON DriveLink USB3.0 User Manual

Page 4

Text mode
Original mode

DRIVELINK USB3.0

Note:
There is no need to install additional drivers.

Before you shut down your PC remove the
DriveLink from your system’s hardware con-
figuration by double-clicking the symbol in
the task bar. A menu will open up. Select the
DriveLink to securely remove it. After that
switch off the DriveLink and shut down your
PC.

4. Installing the hardware

1. Connect the ISO power connector of the
included power supply to the ISO power
connector of the DriveLink and connect it to a
power outlet.

2. Connect the included USB3.0 cable to the
respective DriveLink connector and a USB3.0
plug of your PC.

3. Connect a SATA device to the DriveLink‘s SATA
connector. The device will be detected and
installed automatically. Connected HDDs/
optical devices will be displayed in the
Windows Explorer.