SHARKOON MS120 - Manual (Page 13)

MS120
2. Attach the HDD/SSD to the case from the outside (fig. 9 a and b).
(Screws for drive/HDD mounting)
Fig. 9 a (3.5" HDD) Fig. 9 b (2.5" HDD)
3. Connect the HDD to the power supply and the mainboard.
8.2 Into the bottom panel
1. To use the HDD attachment in the bottom panel, the left HDD attachment panel must be removed from
the case (see above 5.).
2. Remove four buffers from the HDD attachment panel, which you removed from the case, and insert
them into the openings on the case‘s bottom panel (fig. 10).
(Buffers)
Fig. 10

13