SHARKOON DriveLink Combo USB3.0 - Manual (Page 3)

DRIVELINK combo USb3.0
3. The device at a glance
A – Connector for 2.5" IDE HDDs
B – Connector for 3.5" and 5.25" IDE devices
a – Data connector for 3.5" IDE HDDs
b – 4-pin power connector for 3.5" IDE HDDs
C – Write protection for IDE HDDs
c – Write protection active LED
d – Write protection inactive LED
D – Write protection for SATA HDDs
e – Write protection active LED
f – Write protection inactive LED
E – Power LED
F – Connector for SATA devices (2.5", 3.5" and 5.25")
G – On/off switch
A – Connector for SATA devices (2.5", 3.5" and 5.25")
A – USB3.0 connector
B – ISO power connector
*Note on the write protection:
The write protection can only be enabled/disabled when the
DriveLink Combo USB3.0 is switched off!
2
A
A
B
C
D
E
F
G
a
b
c d
e f
A
A
B