AGFA DV-5000G - Manual (Page 68)

67
12
Transferring Data to a Computer
Installing the Digital Camera Driver
Before connecting this camera to a computer for the first time, you should install a driver on the
computer. The driver is on the CD-ROM disc provided in the package. To install the driver:
1. Insert the CD-ROM into the computer’s CD-ROM drive. The auto run screen will
appear.
2. Click “Install Device Driver”. Follow the on-screen instructions to complete the
installation. Depending on your operating system, you may have to restart your
computer after installing the driver.
Connecting your Camera to a Computer
You can transfer pictures, movies or voice recordings stored on your camera to a computer and
send them in emails to friends or post them on websites. To do this you should:
1. Install the camera driver on your computer.
2. Connect the computer and camera with the supplied mini USB 2.0 cable.
3. Default mode is Mass Storage Mode when the camera connects to PC
4. Transfer pictures or movies or MP3 or voice recordings
Mass Storage Device Mode
The RED LED will light up when the camera is connected to the computer. Movies, pictures
and voice recordings can be found on your computer at “My Computer\Removable
Disk\DCIM\”. Under this mode, you can read, delete, move, or copy any movie/picture/voice
recording you want. Use the bundled Arcsoft application software to edit the movies or
pictures.
PC Camera Mode
When in Mass Storage Device Mode, press RECORD/PLAY Button to switch to PC Camera
Mode and the GREEN LED will light up. Under this mode, you can implement live video
conference meetings or use video email over the Internet.