SHARKOON T28 - Manual (Page 7)

T28 7
In order to remove the HDD cages, proceed as follows:
1. Unscrew the thumb screws on the back side of the case and remove both side panels.
2. Press/lift the attachment levers of the HDD cage (fig. 1).
fig. 1
3. Drag the HDD cage towards you.
5. Installation of a mainboard
1. Open the case by loosening the thumb screws on the case’s back side and removing
the left side panel. Lay down the case sidewise on an even surface.
2. The mainboard’s mounting panel inside the case provides various drillings to fix the
stand-offs (fig. 2).
fig. 2