Nilfisk-ALTO A500.2 User Manual

Page 8

Output Connector
These NEUTRIK connectors are used to connect with your speakers.

AC Input
Use it to connect your A500.2 DRAGONFLY to the supplied AC cord only. Please
check the voltage in your country before attempting toconnect the unit with the
main AC.

Fuse Holder
The fuse can protect the AC supplies circuit of the equipment.
CAUTION: if there is something wrong with the fuse or the fuse needs to

change, use only the recommended fuse type as indica ted in

this unit. If the fuse continues to blow after replacing, discon
tinue using this unit before being repaired.

4. TECHNICAL SPECIFICATION

8 ohms per channel(EIAJ)

4 ohms per channel(EIAJ)

4 ohms per channel(RMS)

A500.2 DRAGONFLY

20Hz [email protected]%THD, Stereo Mode

MODEL

Controls

FRONT: Power switch, CH1 & CH2 LEVEL knobs

REAR: CH1 & CH2 LIMITER

Indicators (per channel)

Power-On: Green LED

Clip: Red LED

Limit: Yellow LED

Signal: Green LED

Connectors of each channel Input: COMBO connector

Output: NEUTRIK Speak-on connector

Power Supply

190-240 Vac~50Hz / 95-120Vac~60Hz

Dimension

Net Weight

5. WARRANTY

1. WARRANTY REGISTRATION CARD

To obtain Warranty Service, the buyer should first fill out and return the enclosed Wa-
rranty Registration Card within 10 days of the Purchase Date.

260W

480W

245W (at THD 1%)

3.85 kg (8.49lb)

314W x 208.5D x 66.6H mm / 12.4" x 8.2" x 2.6"

Input Sensitivity @4 ohms +3dBu