Atlantis Land NETFLY PCI 54 - Manual (Page 9)

9
• Visually inspect the PCI Adapter and make sure that it is fully plugged in to
the PCI slot.
• Make sure that there is a well environment that there is no much intrusion
to have a better connection.
3. Hardware Installation
3.1 LED Indicator
LINK: The Link LED indicator lighted green when the Wireless Adapter is connected to
wireless network successfully.
3.2 Check the installation
The LEDs of the Wireless LAN Adapter are clearly visible and the status of the network
link can be seen instantly:
• Once the device is plugged to the station’s PCI slot, the LED of the
Wireless LAN Adapter will light up indicating a normal status.
• When the device plugged to the station’s PCI slot and the driver was
installed, the ACT will start alternate blinking, it means that the device is
starting to scan the wireless devices near the Wireless LAN Adapter.
• While the Wireless LAN Adapter linked up and transmitting data to the
Access Point or to other Wireless LAN station, the Link LED will lighted
green.
4. Software Installation
4.1 Utility and driver installation for OS Windows
1. Insert the CD-ROM and the Auto-run program will appear. Alternatively,
open a file browser and double click on the autorun.exe file located in the
CD directory. In some specific setting on Windows system, you may need
to proceed the software manually, go to your Windows Start menu and
choose Run, type “D:\A02-PCI-
W54\UTILITY\\SETUP.EXE” in the dialog box and click OK.