RIKON Power Tools 61-1250 - Manual (Page 8)

8
Manual Control:
The air filtration system is operated
manually. The control panel located on
the side of the unit.
The switch is operated by a pull chain
(A, Fig.02). One pull turns on unit to low
speed, two pulls turns on unit to high
speed, a third pull turns unit off.
Fuse switch (B, Fig.02) will pop out in
case of overload. Wait 3-5 minutes
before resetting the fuse switch.
Operation
Fig.02
Tech Tip:
If you plan on using the air filtration system on one speed, wire wall a switch in-
line to control the operation from a convenient location. Consult with a qualified
electrician for proper circuit size.
WARNING
A B