RIKON Power Tools 61-200 - Manual (Page 8)

8
Remote Control:
1. The on/off button (Fig.04) turns the
unit on and off. Pressing this button will
start the fan on the low speed.
2. Time button (Fig.04) controls the
three different settings.
2H will light up on the back of the unit
with one press of the time button. The
air filtration system will operate for 2
hours then shut off.
4H will light up on the back of the unit
by pressing the time button twice. The
air filtration system will operate for 4
hours then shut off.
8H will light up on the back of the unit
by pressing the time button three times.
The air filtration system will operate for
8 hours then shut off.
Operation
3. Speed button (Fig.04) controls the
three different settings, Low, Medium
and High.
Manual Control:
The air filtration system can also be
operated manually. The control panel
loacted at the end of the unit has the
same functions as the remote control
above:
On/Off button (A, Fig.05)
Time button (B, Fig.05)
Speed button (A, Fig.05)
Fuse switch (C, Fig.05) will pop out in
case of overload. Wait 3-5 minutes before
resetting the fuse switch.
WARNING
Fig.04
Fig.05
A
B
C