C.1.2 networking features, C.1.3 local area network specifications, C.1.2 – Aztech Systems DSL9100R User Manual
Page 28: Networking features, C.1.3, Local area network specifications

28
User Manual
User Manual
User Manual
User Manual
User Manual
•
RFC 2516 PPP over Ethernet Relay support
•
Up to 8 Multiple PVCs
•
OAM (I.610) F4/F5 Loopback, Send, and Receive
C.1.2 Networking Features
•
IEEE 802.1d Transparent Bridge
•
Static, RIP1, RIP2 routing support
•
NAT IP Masquerading
•
DHCP Server
•
DNS Relay Agent
•
IP Port Forwarding
•
PPTP Access Concentrator
•
Telnet server for Remote management
•
TFTP Server and Client for software update
•
SNMP version 1 Agent
C.1.3 Local Area Network Specifications
•
Store and Forward Switch Architecture which provides better integrity of data and
prevents wrong order of packets at the output ports.
•
Provides 2Kbyte Frame Buffer Memory per port
•
Offers 4 dual-speed 10 Base-T / 100 Base-TX switch ports
•
Supports full-wire speed, full-duplex traffic on every port simultaneously.
•
Fully support IEEE 802.3 Ethernet and Fast Ethernet
•
Fully support IEEE 802.3u Auto-Negotiation which provides automatic selection of
transmission modes, half and full duplex as well as transmission speeds, 10 Mbps
or 100 Mbps
•
Supports self-learning Layer 2 Address Resolution and has a storage capacity of 17K
MAC addresses
Supports IEEE 802.1x Flow Control in Full Duplex and Back Pressure for Half-Duplex.
Multi-stand design allows for convenient and flexible placing