Johnson Level & Tool Mfg. 40-6622 - Manual (Page 6)

6 ©2013 Johnson Level & Tool
6. Operating Instructions
Battery Installation
As shown in figure, remove the battery
door and put three “AA” alkaline batteries
into the battery compartment according to
the polarity indicated. Snap the battery
cover back into place.
Note: Used (discharged) batteries are
hazardous waste and should be
disposed of properly.
7. Using the Product
Press the power button. Position the laser so that it’s appropriate for
your application needs. If necessary, align the laser beam(s) with a
reference point(s). The freestanding target increases the beams’
visibility. Use the laser beams as line references. Use the leveling
screws to center the bubble vials.
Power Button
7162H_Manuals 7/15/13 12:23 PM Page 6