Johnson Level & Tool Mfg. 40-6602 - Manual (Page 10)

10 ©2010 Johnson Level & Tool - Rev. 1
mode LED will flash. The instrument is now in the manual mode.
Note: When manual mode is on, the laser does not self-level and
no out-of-level alarm is indicated.
Press the manual mode button again and the instrument will power off.
1. If the instrument is in manual mode and the instrument is turned to
the “Unlock” position, the instrument will exit manual mode and
enter self-leveling mode.
2. If the instrument is in the “Unlock” position, pressing the manual
mode button will not get a response.
Output of the laser line
Press button to form the hori-
zontal laser line above
Press button to form the verti-
cal laser line as shown above
Press button to form the two
vertical laser lines shown above Press all buttons to form the laser
lines shown above
4069H_Manuals 11/5/10 8:49 AM Page 10