Johnson Level & Tool Mfg. 40-6242 - Manual (Page 3)

3
The AP90C Beam Bender adapts to the GL100 MX Laser Precision Level and creates two laser beams that are exactly 90
degrees apart. This is used for quick layouts, exact positioning of reference points and vertical plumbing. The AP180C
Beam Spreader creates a line useful for layouts, marking and broad area leveling.
For protection during transportation, the AP42 padded carrying case is recommended. This zippered case fits all
laser models and includes the “Laser Hand Level" logo. The AP40 hard shell carrying case is foam filled and
designed to store the laser level and all accessories.
The laser beam center is positioned 1/2 inch from the bottom of the level. This means that a 1/2 inch needs to be
subtracted from the center spot of the laser dot to reference the actual bottom of the level.
Safety Precautions:
1. Avoid direct eye exposure to the laser beam.
2. Don’t view the laser beam with optical or magnifying devices or equipment.
3. Avoid looking directly into reflections of the laser beam
Specifications:
Model: GLl00 MX Laser Precision Level
• Dimensions: 1" W x 1 1/8" H x 13" L (25.4mm x 28.6mm x 330.2mm)
• Weight: Less than 20 oz.
• Level Vial: 5 minute: Accurate to +/- 1/8” over 100'.
• Plumb Vials: 30 minute; Accurate to +/- 1/4” over 20'.
• Laser Beam: Accurate to +/- 1/16” over 100'.
• Power: 2 Size “AA” MN1500 Alkaline Batteries. Over 4 hours of continuous operation. (Batteries included.)
Warranty:
This GL100 MX Laser Precision Level™ is warranted to the original purchaser to be free from defects in
workmanship and material. Laser Tools Co., Inc. will repair or replace any defective part, which may develop
under normal and proper use within a period of one year from the date of purchase, without charge of parts and
labor, once delivered, shipped prepaid to Laser Tools Co., Inc., together with proof of date and place of
purchase. This warranty is not subject to misuse, abuse, assign, or transfer. The exclusive remedy under any and
all warrants and guarantees expressed or implied is limited to repair and/or replacement as provided herein and
Laser Tools Co., Inc. shall not be liable for damages from loss or delay of equipment uses, consequential or
incidental damage.
Manufactured by: Laser Tools Co., Inc.. 12101 Arch St., Little Rock AR 72206 Phone 501-562-0900 FAX 501-562-
0022, Web site
www.Lasertoolsco.com , E-Mail [email protected]