Johnson Level & Tool Mfg. 40-6001 User Manual

Page 19

To tally (or sum) the Volume calculations of multiple rooms use the
following steps:

Suggestions:
Be sure you have the desired unit of measure selected.
For better visibility press and hold the backlight button to activate
the backlight.

It is recommended that you test this function prior to taking important
measurements. Simple write down each Volume calculation on a piece of
paper and add (or subtract) the Volume calculations along with the Laser
Distance Measure. This will familiarize you with the process of how the
calculations are determined.

Follow the Volume measurement instructions above to enter Volume mode.
Once the first Volume calculation is taken it will be displayed in the
bottom row on the LCD screen.
Press and release the button.
Upon pressing the button, the LCD screen will be cleared however
the Volume calculation is stored.
The Volume mode will remain active on the LCD screen .
Take the second Volume dimensions.
When the Volume calculation appears in the bottom row press and
release the button again.