Customer service, Wiring diagram, Serial plate location – Alliance Laundry Systems DRYING TUMBLERS 70269501R3 User Manual
Page 8

Introduction
70269501
6
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Customer Service
If literature or replacement parts are required, contact
the source from which the machine was purchased or
contact Alliance Laundry Systems at (920) 748-3950
for the name and address of the nearest authorized
parts distributor.
For technical assistance, call (920) 748-3121.
Wiring Diagram
The wiring diagram is located in the junction or
contactor box.
Models starting Serial No. 0309_____ or later will
have the wiring diagram part number in the lower
portion of the electrical data on the serial plate.
Serial Plate Location
When calling or writing for information about your
product, be sure to mention model and serial numbers.
Model and serial numbers are found on serial plate on
rear of machine, and inside door hinge. Refer to
Figure 1.
Figure 1
TMB2025N
1
Serial plate
TMB2025N
25, 30 AND 35 POUND TUMBLERS
T30
1
1
Conversion Table
Multiply
By
To Obtain
Multiply
By
To Obtain
Btu
0.252
kCal
Pounds/sq. inch
0.06895
Bars
Btu
1055
Joules
Pounds/sq. inch
0.070
kg/sq. cm
Inch
25.4
Millimeters
Pounds (lbs.)
0.454
Kilograms
Inches W.C.
0.036
Pounds/sq. inch
Boiler Horsepower
33,479
Btu/hr.
Inches W.C.
0.249
kPa
Boiler Horsepower
34.5
lbs. steam/hr.
lb/inch
2
(psi)
6.895
kPa
CFM
0.471
liters/second
ft
3
28.32
Liters
kW
3414
Btu/hr.