Using bios, Advanced chipset setup – Elitegroup MD120 (V1.0) User Manual
Page 26
20
Using BIOS
Advanced Chipset Setup
This page sets up more advanced information about your system. Handle this page
with caution. Any changes can affect the operation of your computer.
CAS Latency Time (By SPD)
When synchronous DRAM is unstalled, the number of clock cycles of CAS latency
depends on the DRAM timing. Do not reset this field from the default value specified
by the system designed.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Advanced Chipset Setup
DRAM Frequency
800 MHz
CAS Latency Time
By SPD
Share Memory Auto Detection
Auto
Share Memory Size
256MB
Memory Remap Feature
Enabled
HPET
Enabled
HDMI Audio
Enabled
Help Item
By SPD
3T
4T
5T
DRAM Frequency (800 MHz)
This item enables users to adjust the DRAM frequency. The default setting is auto and
we recommend users leave the setting unchanged. Modify it at will may cause the
system to be unstable.
Share Memory Size (256MB)
This item lets you allocate a portion of the main memory for the onboard VGA
display application.
Share Memory Auto Detection (Auto)
Disable this item to set the Share Memory Size . And if the item is set to Auto, Share
Memory Size can be controlled according to the dram size. When the dram size is less
than 512 MB, Share Memory Size should be set to 64 MB. While between 512 MB
and 1 GB, it should be set to 128 MB. When more than 1 GB, it should be set to 256
MB.
Options
Memory Remap Feature (Enabled)
This item allows you to remap the overlapped PCI memory above the total physical
memory if you have a 64 bit OS and 8 GB of RAM.
mnlk
: Move
F10: Save ESC: Exit
Enter : Select
+/-/: Value
F9: Load Default Settings
F1: General Help
Boot Other Device (Yes)
When enabled, the system searches all other possible locations for an operating
system if it fails to find one in the devices specified under the First, Second and Third
boot devices.
Press
HPET (Enabled)
This item enables or disables HPET (High Precision Event Timer) support.