Elitegroup DS110 (V1.0) - Manual (Page 28)

22
Using BIOS
Super IO Configuration
Use this item to show the information of Super IO configuration.
+/- :Value
Enter : Select
:Select Screen
:Select Item
Super IO Configuration
Serial Port 0 Configuration
Parallel Port Configuration
F1:General Help
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
F2:Previous Value
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Version 2.02.1205. Copyright (C) 2010, American Megatrends, Inc.
Set Parameters of Serial Port
0 (COMA)
Main Advanced Chipset Frequency/Voltage Control Boot Security Save & Exit
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Serial Port 0 Configuration
Scroll to this item and press to view the following screen:
Serial Port (Enabled)
This item allows you to enable or disable serial port.
Device Settings (IO=3F 8h; IRQ=4)
This item shows the information of the device settings.
Change Settings (Auto)
Use this item to change device settings.
+/- :Value
Enter : Select
:Select Screen
: Select Item
Serial Port 0 Configuration
Serial Port [Enabled]
Device Settings
IO=3F8h; IRQ=4;
Change Settings [Auto]
F1:General Help
F2:Previous Value
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Version 2.02.1205. Copyright (C) 2010, American Megatrends, Inc.
Select an optional setting for
Super IO device.
Main Advanced Chipset Frequency/Voltage Control Boot Security Save & Exit
Press to return to the Super IO Configuration page.