Elitegroup E09EI6 - Manual (Page 13)

7
Japan
¾ All components of the cord set (cord, connector, and plug)
must bear a “PSE” in accordance with the Japanese Dentori
Law.
¾ The minimum specifications for the flexible cord are: (1) 0.75
mm
2
conductors, (2) Type VCT or VCTF, and (3) 3-conductor.
¾ The cord set must have minimum rated current capacity of 7
A.
¾ The attachment plug must be a two-pole, grounded type with
a Japanese Industrial Standard C8303 (15 A, 125 VAC)
configuration.
Other Countries
¾ The cord set fittings must bear the certification mark of the
agency responsible for evaluation in a specific country.
Acceptable agencies are:
•
CCC (China)
¾ The flexible cord must be of a HAR (harmonized) type
HO5VV-F 3-conductor cord with a minimum conductor size of
0.03 square inches.
¾ The minimum specification for the flexible cord for Class II
product are: (1) 2X0.75 mm
2 conductors, (2) 2-conductor cord.
¾ The cord set must have a current capacity of at least 10 A and
a nominal voltage rating of 125 / 250 VAC.
This model is designed to use with the
following AC Adapter model only
Manufacture: LI SHIN INTERNATIONAL ENTERPRISE CORP.
Model:
0225C2040 (2 Pin)
Manufacture: Delta
Model:
ADP-40MH AD (2 Pin)
Battery Pack Safety
¾ The battery pack is intended to use only with this notebook.
¾ The battery pack should be replaceable by the end user.
Only qualified service technicians should replace the battery
pack.
¾ Do not disassemble the pack.