Elitegroup L373N1 v.5 - Manual (Page 8)

¦ chapter 3 upgrading your computer
3-8
DIMM Sockets
5. If you want to remove an old DIMM from the socket, press
out on the latches located on both edges of the socket at the same
time. The DIMM should pop up to an angle of 30 degree (see
diagram below). Pull the DIMM module out of the memory socket.
Store away the DIMM for the future use.
6. Install the new DIMM module into the memory socket.
The DIMM will only fit in one orientation. Insert the DIMM at an
angle of approximately 30 degrees into the empty memory socket.
Then press it firmly so that the contact edge is driven into the
receiving socket.