Elitegroup 223EI v.4 - Manual (Page 3)

■ chapter 4 upgrading your computer
Upgrading the Hard Disk Drive
To replace the hard disk drive, do the following:
1. Turn OFF the computer. Unhook the AC cord and all
cables/devices attached to the notebook. Remove the battery
back.
2. Place your hand on a large metal object momentarily to
discharge any static electricity.
3. Locate and remove Screw A.
4. Remove HDD Cover.
5. In order to prevent the collision with the thermal module
when the HDD is being removed, three screws fixed to
the thermal module need to be removed first.
4-3