Elitegroup 223EI v.2 - Manual (Page 5)

■ chapter 2 bios setup and security feature
2-5
Item Selections /
Sub-menu Description
TouchPad
Support Enabled
Disabled Enable or disable the built-in touchpad.
LCD
AutoDimm
Function Enabled
Disabled [Enabled]: The LCD backlight
automatically decreases when the AC
Adapter is unplugged from the wall.
[Disabled]: This function is disabled.
BIOS Post
Beep
Sound Enable
Disable [Enabled]:The system beeps when
performing POST on boot.
[Disabled]:The beep is disabled.
Boot Setup
►Boot Settings Configuration
Item Selections /
Sub-menu Description
Quick
Boot Disabled
Enabled [Enabled]: The system skips certain tests
while booting. This shortens the boot-up
time.
[Disabled]: The system performs full tests
while booting.
►Boot Device Priority
Item Selections /
Sub-menu Description
1st Boot
Device Set the type of device for the 1st drive
BIOS attempts to boot from. If Intel UNDI,
PXE-2 is selected, system will attempt to
load boot sector from the Ethernet port.
2nd Boot
Device
Removable Dev.
Intel UNDI, PXE-2
Hard Drive
CD/DVD
Set the type of device for the 2nd drive
BIOS attempts to boot from.