Elitegroup M30EI v.4 - Manual (Page 10)

■ chapter 4 upgrading your computer
4-10
To install the DIMM under the keyboard, do the following:
1. Follow Steps 1~4 from the previous section and remove
Screw D.
2. Find the keyboard latches near the edges of the
keyboard. The latch is spring-loaded. It will retract when
pressed and revert back to its original position when released.
Use a small blade to press the latch inward. The keyboard tray
should pop up slightly over the latch. If the keyboard tray does
not pop up, try to gently lift it up just over the latch. Repeat the
step for the other keyboard latches.