Hdd connector, Screw b x2 – Elitegroup 255KI3 v.4 User Manual

Page 4

background image

■ chapter 4 upgrading your computer

HDD Connector

6.

Locate and remove 4 Screw B’s from the HDD module.

Remove the metal case.

Screw B x2

Screw B x2

7.

Re-attach the metal cover to the new hard drive and

tighten 4 Screw B’s. Note the green PC board of the hard disk

drive is facing against the metal case.

8.

Re-attach the HDD module to the HDD connector.

9.

Put the HDD cover back and re-attach Screw A.

4-4