Elitegroup 255KI3 v.2 - Manual (Page 6)

■ chapter 2 bios setup and security feature
►Boot Device Priority
Item Selections /
Sub-menu Description
1st Boot
Device Set the type of device for the 1st drive
BIOS attempts to boot from. If Intel UNDI,
PXE-2 is selected, system will attempt to
load boot sector from the Ethernet port.
2nd Boot
Device
Removable Dev.
Intel UNDI, PXE-2
Hard Drive
CD/DVD
Set the type of device for the 2nd drive
BIOS attempts to boot from.
Note:
If you select Intel UNDI, PXE-2, the system will attempt to boot from the
network.
Note: When the BIOS performs POST, you may also press F12 Key to enable the
Boot Device selection menu. You may choose CD/DVD, Hard Drive, or Intel UNDI,
PXE-2 as the first storage device to boot from. If you have already connected a USB
Floppy Disk Drive before powering up, it will appear as a Removable Device in the
Boot Device selection menu
2-6