Elitegroup 257SA1 v.2 - Manual (Page 7)

■ chapter 2 bios setup and security feature
Boot-up
NumLock Off
On [On]: NumLock (numeric keyboard) is
enabled on boot.
[Off]: The keyboard functions normally;
embedded numeric keyboard is disabled.
►Boot Device Priority
Item Selections /
Sub-menu Description
1st Boot
Device Set the type of device for the 1st drive
BIOS attempts to boot from. If Intel UNDI,
PXE-2 is selected, system will attempt to
load boot sector from the Ethernet port.
2nd Boot
Device
Removable Dev.
ATAPI CDROM
Hard Drive
Intel UNDI, PXE-2
Disabled
Set the type of device for the 2nd drive
BIOS attempts to boot from.
3rd Boot
Device Set the type of device for the 3rd drive
BIOS attempts to boot from.
4th Boot
Device Set the type of device for the 4th drive
BIOS attempts to boot from.
Note: If you select Intel UNDI, PXE-2, the system will attempt to boot from the
network.
Note: When the BIOS performs POST, you may also press F12 Key to enable the
Boot Device selection menu. You may choose ATAPI CDROM, Hard Drive, or Intel
UNDI PXE-2 as the first storage device to boot from. If you have already connected
a USB Floppy Disk Drive before powering up, it will appear as a Removable Device
in the Boot Device selection menu.
2-7