Elitegroup 258KA v.4 User Manual

Page 9

■ chapter 4 upgrading your computer

4-9

Pivot the DIMM until the latches on both sides of the

socket snap into place.

Note:

Notice the notch on the DIMM. The notches should fit nicely with the

socket.

Replace the System Device Cover and 11 Screw A’s.

Congratulations! You have just completed the memory upgrade.

When you boot up the computer, you should expect to see an

increase in DRAM capacity.

Note:

Your computer has been tested with a wide range of DIMM on the

market. However, not all memory modules are compatible. Check with your

system vendor for a list of compatible DIMM for your computer.