Elitegroup 258KA v.2 - Manual (Page 5)

■ chapter 2 bios setup and security feature
2-5
Item Selections /
Sub-menu Description
IR Mode Disable
3F8/IRQ4
2F8/IRQ3
3E8/IRQ4
2E8/IRQ10 Select the I/O address and IRQ for IR
On Board
Parallel
Port Disabled
378 / IRQ7
278 / IRQ5 [Disabled]:
The port is disabled.
Or you may choose a value for the
parallel port.
Parallel
Port Mode Normal
ECP+EPP
EPP
ECP You may choose any one of these
settings. ECP offers the best
performance.
Item Selections /
Sub-menu
Description
Wireless
LAN Disabled
Enabled Enable or disable the internal wireless
LAN module (optional.)
Touch
Pad
Support Disabled
Enabled Enable or disable the built-in touchpad.
About Hard Disk Drive Setting
Select Auto to let BIOS configure the drive parameters
automatically. Only for certain old types of hard disk drive will you
need to modify the settings. After pressing Enter on [Hard Disk],
BIOS display the drive parameters. If the detected drive parameters
are not correct or if you’re trying to enable the enhanced IDE
feature, you may still change the value manually.
32 Bit Mode: